* Log In to use the Calculate function *
Become a Member!
Compactness of a Rolled I-Shape Or Channel in Compression:
Calculation:
Designer/Checker:
Input:
Metric Units
(Note: All input Metric units are converted to English units for the equations below and then the output English units are converted back to Metric)
AISC Table B4.1a, Case 1 and Case 5:
This calculation applies to rolled doubly symmetric I shaped sections and channels in compression.
I-Section
Channel
Width of the flange (bf - in or mm)
Height of web (h - in or mm)
*Height of compression portion of web (hc - in or mm)
Steel yield strength (fy - ksi or MPa)
Thickness of the flange (tf - in or mm)
Thickness of the web (tw - in or mm)
*
hc is the distance from section centroid to the compression flange. In doubly symmetric I - shapes and channels hc = h/2.
Output:
Login
to enable the Formulas!
Not a Member?
Join Now!
Width thickness ratio flange, WTF =
Limiting slenderness for noncompact flange, WTFr =
Flange compact, noncompact or slender?
Width thickness ratio web, WTW =
Limiting slenderness for noncompact web, WTWr =
Web compact, noncompact or slender?
Start Using The Calculations >>> Become A Member Now!
CECALC.com LLC - Copyright 2010 - 2024 - All rights reserved.